42
GSR1700 CSX Operations Manual
Chapter 4
System Setup
4.4.1.1
Record height in field book
If you are not using a handheld controller, you should record the
HI in your field book.
Complete the following steps to find the receiver’s antenna
height:
1.
Measure the slant height (SH) and record the radius (R).
2.
Use the following equation to find the vertical height:
3.
Add the vertical offset between the bottom of the receiver
and the phase center to the result of step 2.
4.4.1.2
Record height in software
The software (Spectrum Survey or SDR+) will automatically
compute the HI when you select the measurement method and
enter the SH.
4.4.2
Vertical and true vertical height methods
Typically, if you are surveying using a graduated range pole or
fixed height tripod, you will use the vertical or true vertical
height measuring methods.
Figure 11: Vertical/true vertical height methods
H
SH
2
(
)
R
[ ]
2
–
=
GSR1700 CSX Operations Manual (OM-1700CSX Rev 2, 750-1-0077).book Page 42 Wednesday, December 3, 2008 2:32 PM
Summary of Contents for GSR1700 CSX
Page 1: ...GNSS Receiver System GSR1700 CSX Operations Manual ...
Page 2: ......