Sokkia GCX2 Operating Manual Download Page 43

Page: 43 / 57

Specifications

P/N: 1005278-01

• • • • • •

Specifications

The GCX2 is a Vanguard technology-based GNSS receiver featuring 226 channels and Long-Range Bluetooth

Technology

for small job site operations and cable-free network solutions. This chapter provides specifications

for the receiver and its internal components.

General Details

Table 8 lists the GCX2’s general specifications.

Table 8. General GCX2 Specifications

Physical

Enclosure

Magnesium alloy with Lexan radome

Color

Sokkia Blue and Gray (bumper)

Dimensions (mm)

47 (w) x 47 (d) x 185.5 (h) mm

Weight (g)



including battery

Up to 375g, depending on the configuration

Status
display/panel

MINTER (4 LEDs + 1 power button)

USB/Power

USB Mini B 2.0 (for communications and power)

Bluetooth antenna

Fully integrated, high-sensitivity

Tracking

Number of
Channels

226 channels Vanguard™ ASIC with patented Universal Tracking Channel Technology

Tracked Signals

GPS: L1 C/A, L1C, L2P, L2C ode and carrier
GLONASS: L1 C/A, L1P, L2 C/A, L2P code and carrier
SBAS: L1 C/A, WAAS/MSAS/EGNOS
QZSS: L1 C/A, L1C, L2C
GAGAN

Multipath
reduction

Yes, code and carrier

PLL/DLL setting

Adjustable bandwidth and order

Smoothing
interval

Pseudorange smoothing: Adjustable

Data Output

RTK Corrections

TPS, RTCM SC104 v 2.x, 3.x; CMR/CMR+

ASCII Output

NMEA 0183 version 2.x and 3.0

RTK position data
rate (max.)

10 Hz

Measurement
data rate (max.)

10 Hz

Real time data
output

TPS; RTCM SC104 v 2.x and 3.x; CMR/CMR+

Data and Memory

Summary of Contents for GCX2

























































Search results

Summary of Contents for GCX2

Reviews:

Related manuals for GCX2

Brands by name

Popular brands

Sokkia GCX2, Operating Manual

Search results

Summary of Contents for GCX2

Reviews:

Related manuals for GCX2

Brands by name

Popular brands