[21]
Warning!
An electric shock can be fatal. Before doing any work on the machine:
-
Switch it off and unplug it from the mains
-
Put up a clearly legible and easy-to-understand warning sign to stop anybody in advertently
switching it on again
-
Check to make sure the electrically charged components
(e.g. capacitors) have been discharged.
-
Bolts in machine case also work for ground connection. Never use other bolt that cannot
work for ground connection.
7.
MAINTENANCE
CARE AND MAINTENANCE
Before open the machine
Maintenance
Please follow the instructions as below to ensure normal lifespan of power source.
-
Conduct safety check at regular intervals (see ―Safety
rules‖)
-
Dismantle machine side panels and clean machine inside with clean and low-pressure
compressed air by professional technician, not less than twice per year. Clean the components at a
certain distance only;
-
If a lot of dust has accumulated, clean the cooling-air ducts.
Maintenance of water-cooled welding torch
For water-cooled welding torch:
- Check the connections of water cooling system
- Check the coolant level and cleanliness(clean coolant only)
-
Frequently check coolant‘s backflow
state
Daily maintenance
Summary of Contents for SI-TIG-300
Page 31: ... 28 9 TIG WELDING TORCH DETAILS ...
Page 32: ... 29 ...
Page 33: ... 30 10 ARGON FLOWMETER REGULATOR DETAILS ...
Page 34: ... 31 ...
