►Use description
1. Switch mainframe:
(1) Plug the power adapter into the power outlet.
(2) Plug the adapter output plug into the rear case power jack.
(3) Press the “Start up Switch” button, then the white light will appear
around the “Start up Switch” button, and the host will start.
(4) The LED decorative light on the front of the main unit lights up, the
default function of the main unit is oxygen mode, and the oxygen outlet
starts to release oxygen.
(5) The host automatically stops after 40 minutes of continuous use.
Press the “Start Switch” button three times to terminate the host operation.
Press the button again to start the host work.
2. Oxygen making function:
Press the "start switch" button to switch the function key to the oxygen
production mode.
Start-up default for oxygen mode, oxygen mode output flow of 1L,
oxygen concentration of 35% - 55%, this function can not be used for
medical treatment purposes.
(1) insert the plug of the oxygen tube into
the oxygen outlet below the main engine.
(2) please plug the oxygen tube tightly into the oxygen outlet.
(3) hang the oxygen tube on the head.
(4) please put oxygen nozzle in the nose direction. The effect of
oxygen delivery within 5cm is better.
3. Atomization function:
Press the “Start Switch” function key to switch to the fog mode.
(1) Use the spray function with the spray can set (atomization kit).
(2) Open the lid and add the specified therapeutic medication using an
eyedropper or a designated standard container.
(3) Connect the connecting tube to the air inlet connection of the
atomizing cup.