ALUMINA
3
RACK INSTRUCTIONS
2
Assembly of Rack
1
Begin assembly of your Alumina
3
rack by removing
the main rack assembly and the 2 arms from the
box. Attach the arms to the main rack assembly
so that the yellow bails on the ends of the arms
are pointing up. Use the detent pins provided to
secure the arms in place.
2
Place the straps on the bike arms.
3
To convert your 2” rack to a 1.25” rack you will
need to add on the 1.25” assembly to the 2” hitch
bar. Remove the nut holder from the inside of the
2” hitch bar assembly. Slide the three-holed nut
plate inside the 2” hitch bar, aligning the holes.
Pass the three bolts through the lock washer and
1.25” hitch bar and tighten to the nut plate. Make
sure the three bolts are tightened securely and
recheck the tightness of the bolts from time to time.
1
32
3
Recommended Accessories
www.softride.com
Top Tube Adapters (26373)
Gooseneck Adapter (25748)
Extended Hitch Bar (26033)
Replacement Straps (25869)
Softwrap Kits (26260)
Bike Bumper (26442)
