22
Meddream VideoStation functionalities v4.6.1 Install Manual
Figure 28. Fast entering into profile settings
Figure 29. Device window of the Recording profile settings
Recording profile settings are grouped into three groups:
•
DEVICE - contains input source options. Affects preview window, signal type.
•
RECORDING - contains recording process setup and configuration options. For recording. Recommended select the
same resolution and frame rate as in DEVICE options.
•
STREAM - contains streaming set available when DIRECTSHOW disabled.
GUI validates and checks available recording device option
combination
by DICOM TRANSFER SYNTAX
option.
Requires to ensure, that PACS supports transfer syntax(ask PACS administrator or see PACS DICOM
conformance statement document) and recorder DICOM files will be accepted by PACS
Some options can be updated in C:\MedDreamStation\recorder\configurationSettings.json, but during re-
installation
– will be overridden.
Device settings
In DEVICE window of the RECORDING PROFILE SETTINGS, you can view and modify options:
•
ACTIVE
– enable or disable recording device profile.
•
PROFILE NAME
– enter or edit name for the profile. Each input source profile is identified by profile name. If user
enters the already existing profile name, the system will overwrite the existing input source profile data. In order to
create a new profile, enter different unique profile name.
•
DEVICE
– select found video devices, like camera or video capture board.
NOTE!
If cannot see any devices or some is missing
– please check connection cables to the device. If
problem persist - check Windows OS device list, if all drivers installed properly.
