Chapter 4 - Mount/unm ount device
14
TH LINK PROFINET - Installation Manual
4
Mount/unmount device
4.1
Mount device
Note
Make sure you have a minimum of 5 cm below and above
the TH LINK in order to ensure heat dissipation.
Figure 2: Mount and unmount the TH LINK
[1] Device with notch on DIN rail
[2] DIN rail
[3] Device on DIN rail
[4] Stop lever
1. Place the device with its notch on the DIN rail.
2. Move the device downwards until the stop lever locks into place
on the DIN rail.
