Cha pter 3 - Ins ta l l a ti on
© Softing Industrial Automation GmbH
11
3
Installation
3.1
Hardware installation
Note
With an ambient temperature above 55 °C at the place of installation it is likely
that the temperatures of connecting cables will increase if the cables are
installed in an unfavourable position. In such cases, measure the temperature
to ensure that the service temperature of the cables is not exceeded (i.e. 80 °C),
or use cables sustaining high temperatures of at least 90 °C.
3.1.1 Mounting and dismounting
Note
Make sure the FG-200 is mounted in a manner that the power supply
disconnecting device or interrupt facility can always be reached easily.
Note
Depending on the installation position, the maximum ambient operating
temperature may differ. Refer to
for detailed information.
Installation and inspection
Installation and inspection must be carried out by qualified personnel only
(personnel qualified according to the German standard TRBS 1203 or similar
(Technical Regulations for Operational Safety). The definition of terms can be
found in IEC 60079-17.
33
