Chapter 3 - Installation
Version EN-062020-1.00
11
3.1.3
Connection diagram PB Model
The epGate PB has two physical PROFIBUS PA segment connections (PA0 to PA1) and one RS-485
connection (DP). The gateway has two 10/100 Base-T Ethernet ports (ETH1/ETH2). Both RJ45 ports
correspond to IEEE802.3 and are connected to an internal switch for line topologies. The following
diagram shows the side profile of the epGate PB model with the input and output interfaces and fieldbus
connections:
3.1.4
Connection diagram DP Model
The epGate DP has one PROFIBUS RS-485 connection (DP). The gateway has two 10/100 Base-T Ethernet
ports (ETH1/ETH2). Both RJ45 ports correspond to IEEE 802.3 and are connected to an internal switch for
line topologies. The following diagram shows the side profile of the epGate DP model with the input and
output interfaces and fieldbus connections:
