edgeGate - Quick Startup Guide
14
© Softing Industrial Automation GmbH
3.5
Inserting an SD card
On the bottom of the device you find a slot for a micro SD card. You can save your gateway configuration
data to a storage card and reload it from here in case your device settings have been accidentally corrupted.
Note
The micro SD card is not included in the scope of delivery.
When selecting an SD card bear in mind the range of the edgeGate operating temperature.
The storage capacity of the micro SD card may not exceed 32 GB.
1. Remove the card slot cover on the bottom of the device.
2. Insert the SD card carefully into the slot until the card clicks into place.
3. Place the cover back on the housing.
4. Open the user interface of the gateway and check if the SD card is recognized by the device (see sections
).
5. Start
Information
Gateway Status
Hardware Status
.
The page will show you if the SD card is recognized in the file system and how much of the storage
memory is available.
