Page: 4
5 CE
Information
This device complies with the requirements of the EC directive 2004/108/EC
"Electromagnetic Compatibility" (EMC directive).
The product meets the following requirements:
•
Emission: EN55022 Class B (ITE Product Standard)
•
Immunity: EN61000-6-2 Generic Immunity Standard (industrial environments)
A "Declaration of Conformity" in accordance with the above standards has been made and is
filed at Softing Industrial Automation GmbH, Germany.
NOTE:
•
To satisfy the EMC requirements, the equipment used (PC, monitor, CAN stations, etc.)
also has to meet the EMC requirements. A shielded cable must be used. In addition, the
cable shield must be grounded properly.
6 Technical
data
•
Unit:
PCI Express card, acc. to PCIe specifications r1.0a and CEM 1.1
•
CPU:
XC161, 40 MHz with internal TwinCAN CAN controller
•
Memory:
256 kbytes XC161 on-chip Flash, 512 kbytes RAM,
•
PC interface:
PCI Express, single lane, 512 kbytes shared RAM
•
PC interrupt:
controlled by the operating system
•
CAN interface:
galvanically isolated (1kV) CAN high speed according to
ISO
11898-2
•
CAN connector:
Sub-D 9 pin male, pin assignment acc. to CiA DS102
•
Baud rate:
3.125 kbit/s up to 1 Mbit/s
•
Power supply:
+12V (
±
5%); typ. 60 mA
+3.3V
(
±
5%); typ. 500 mA
•
Temperature range:
Operation:
0°C … 70°C (board ambient, i.e. inside the PC)
0°C … 55°C (typ. PC ambient)
Storage:
-20°C … 70°C
•
Relative humidity
< 90% (non-condensing)
