5
TONE GENERATOR
•
Power on the CableMaster 600/650.
•
Use the left or right arrow buttons to select the
tone generator icon and press the enter button.
•
The CableMaster 600/650 will automatically
activate the tone generator upon entering the
tone generator menu.
•
Connect your cable to either the RJ45 jack or coax
connector located on the top of the CableMaster 600/650.
•
To switch between network and coax cables, press the coax cable/RJ45 soft key
/ .
•
Press the up or down arrow buttons to select tone cadences 1 thru 4.
•
Press the left or right arrow buttons to select which pin or pair to place the tone.
•
Use a tone probe (P/N TP200 TrakAll) alongside the cable or at the end of the cable
to hear an audible tone.
SETUP
•
Press the setup softkey
to enter the setup menu.
•
Use the up and down buttons to select a setting.
•
Use the left and right arrow buttons to change the selected setting.
•
Press the save soft key
to save changes.
•
Press the defaults soft key
to reset the settings to factory settings.
•
Press the Files soft key
to view stored test results.
CM 600/650 SOFTWARE APPLICATION
To install the CableMaster 600/650 software please download the newest software
version at http://itnetworks.softing.com
