3
V. WARRANTY TERMS
SOR-201 Series Receiver are covered by ONE YEAR LIMITED WARRANTY, which starts from the initial
date of your purchase. We provide its customer whole-life technical supports. If warranty is expired, repair
service only charges parts (if required). In the event that a unit must be returned for service, before returning
the unit, please be advised that:
1. Warranty mark pasted on the housing of unit must be in good conditions.
2. A clear and readable material describes model number, serial number and troubles should be
offered.
3. Please pack the unit in its original container. If the original container is no longer available, please
pack the unit in at least 3 inches of shock absorbing material.
4. Returned unit(s) must be prepaid and insured. COD and freight collect can not be acceptable.
NOTE: we do not assume responsibility for damage caused by improper packing of returned unit(s).
The following situation is not covered by warranty:
1. The unit fails to perform because of operators’ faults.
2. Warranty mark is modified, damaged and/or removed.
3. Damage caused by Force Majeure.
4. The unit has been unauthorized alteration and/or repaired.
5. Other troubles caused by operators’ faults.
V.
Common Problem Solution
1.The power light off after connect the power supply
Reason:
1.
Power supply not connected probably
2.
The power supply fault
Solution:
1. Check the connection
Red On
Fiber
＜
-12dBm or
No input
Fiber
Types
Classification
Remarks
DC IN
Power
supply
Power Supply
Input
DC12v
OPT IN
Fiber Port
Optical Input
1310nm/1550nm Input
OUT_1
、
OUT_2
RF Port
RF Output
Connect to client
ATT
Level
adjustmen
t
Screw
Manual Gain range 0
～
20±1