SoftBank 705SC, User Manual

Page: 227 / 394

14-4
To
o
ls
14
When alarm time arrives
Alarm sounds and a message appears if an alarm sound is set
to mute ( P.9-3), you are notified by the vibrator even when
Alarm sound is not set to
On
in Step 5. Alternatively, notify
using vibrator with vibration setting
On
. Press any key to stop
Alarm sound and press any key again to clear the message.
When Snooze is on
Alarm sounds for one minute, up to six times at the specified
interval, or until Snooze is canceled. If no handset operations
take place, and
y
,
o
(End) are not pressed while alarm
sounds, alarm is automatically reset to sound again at the
specified interval. To cancel Snooze, press
y
or
o
(End).
When a call is being initiated or during a call
During a call or connection (
Connecting
… appears), 705SC
notifies with a short sound and indicator; uncheck
Alerts on
call
(in Phone sounds setting) to notify only by an indicator.
When an outgoing call is being Initiated (
Dialing
… appears),
705SC notifies with a short sound and indicator as connection
established. Press any key twice to clear an indicator; with
Snooze
On
, press
o
(End).
When the time set comes while capturing video
or recording sound
Alarm sound is generated as soon as capturing of recording
finishes.
Auto Power On
If you set this setting to
On
, even when the power is
turned off, the power is automatically turned on at the
time set for a wake-up alarm or alarm.
A
Press
c
(Menu) and select
Tools
→
Alarms
→
Auto power
B
Select
On
or
Off
and press
c
(Save)
Default Setting
■
Off
Note
• Cancel Auto Power On near electronic devices
employing high precision or low frequency signals,
in places where mobile phone use is prohibited, like
airplanes or hospitals.
705SC(E).book 4 ページ ２００６年１１月２１日 火曜日 午後１時５３分