SoftBank 303SH, User Manual

Page: 117 / 128

115
Safety Precautions
SoftBank 303SH
SD/USIM Card Slot
SD Card Slot is located above USIM Card Slot. Insert each card
into correct opening in correct orientation.
・Always power off before card insertion/removal.
・Place USIM Card in USIM Tray beforehand.
Touchscreen
・Touchscreen may not respond in these situations:
・Use with gloves/long fingernails
・Use of pens, pencils or sharp objects
・Use with objects on/against Display
・To prevent malfunctions, do not:
・Touch Display with wet fingers
・Use if Display is wet
・Subject Display to force/pressure
・Place labels or stickers over Display
・If Display is wet, wipe it with a soft cloth.
・To improve response, calibrate Touchscreen as follows.
In application sheet, (Settings) Device info
Adjust touch panel Follow onscreen prompts
・In the following cases, Press
to activate Screen lock,
then Press again to cancel it.
・Handset operates automatically without touch input
・Handset does not respond to touch input
Self Check
If handset is unstable, diagnose the cause as follows.
In application sheet,
(Settings) Device info Self
check Follow onscreen prompts
Saving Battery Power
Reduce battery consumption as follows.
In application sheet,
(Settings) Energy saving
Energy saving settings Energy save
・When
Energy save is enabled, Energy save symbol appears
green.
Headphones
Headphones with Mic (SHLDL1) are available for separate
purchase. Other headphone mics may not function properly on
handset.
・Do not subject Headphone Port to strong impact while using
Headphones with Mic; water resistance may be affected.
Forcing Power Off
If handset has stopped processing or won't respond to
operation, power off forcibly as follows.
(Long Press for at least 8 seconds)
・Release finger after vibration; handset powers off.
Bluetooth
®
Function
SoftBank Mobile Corp. is not liable for any damages resulting
from data/information leakage due to use of handset
Bluetooth
®
function.
■Precautions
The frequency band utilized by handset Bluetooth
®
function
is shared with industrial, scientific or medical equipment,
including household microwave ovens, and used by radio
stations, amateur radio stations, etc. (hereafter "other radio
stations").
1. Before using Bluetooth
®
, visually check that no other radio
stations sharing the same frequency band are in use nearby.
2. Should interference occur between handset and other radio
stations, move it to a different location or cancel Bluetooth
®
function immediately.
3. For additional information and support, contact SoftBank
Customer Support, General Information: From a SoftBank
handset, call toll free at 157. To call toll free from a
landline/IP phone, see "
Customer Service ."
Frequency Band
This radio station utilizes 2.4 GHz band. FH1 indicates FHSS
modulation with maximum transmission radius of 10 meters.
XX4 indicates a different modulation scheme with maximum
transmission radius of 40 meters. It is not possible for the
radio station to avoid using the frequency band of a mobile
unit identification apparatus.
To view related information (Japanese):
In application sheet,
(Settings) Device info
Authentication