SoftBank 006SH, User Manual

Page: 16 / 100

14
Charging Battery
Battery must be inserted in handset to charge it.
AC Charger
Use Micro USB Charging Adapter with AC Charger ZTDAA1
(sold separately).
・Do not pull, bend, or twist the cord.
Insert Charger Connector into Micro USB Charging Adapter
・Confirm connector orientation, then insert connector until it
clicks.
Open Port Cover and connect Micro USB Charging Adapter to
External Connector Port
Extend blades and plug AC Charger into AC outlet
Notification Lamp illuminates while charging.
・Notification Lamp goes out when battery is full. Unplug AC
Charger and retract blades. Remove handset and close Port
Cover.
USB Charge
Connect handset to a PC via Micro USB Cable.
・Power on handset and PC first.
・Battery may not charge if SD Card is not inserted.
・Handset may power on automatically when connected to a
PC via Micro USB Cable; avoid connection aboard aircraft or
in hospitals, etc. where handset use is prohibited.
・Battery may not charge or charge slowly depending on PC
status/environment.
Open Port Cover and connect Micro USB Cable to External
Connector Port
Connect Micro USB Cable to PC USB port
Charging starts.
・When finished, remove Micro USB Cable and close Port Cover.