5
3.2
Connecting the Speaker
1)
Unscrew and remove the cable pass-through plate
2)
Pass the power wire(s) through the wiring device. Making a knot at about 3 inches of the
end of the wire is recommended to avoid the wire going out of the wiring device. Note: If
required by the installation design, install the additional wire(s) that have to be connected
to other speaker(s). Up to 2 additional wires can be connected to power other speakers.
Note:
All wiring should be carried out with 2-conductor stranded copper wire. The wire calibre will
usually be 18 to 14 AWG. (To be specified by the designer of the installation)
Pass cables through the pass-through plate
A knot at about 3 inches of the end
of the wire is recommended
