硕飞科技
SHENZHEN SOFI TECHNOLOGY www.sofi-tech.com
User Manual
10
SP16 Series programmer
Chapter 4. Off-line Programing
SP16-F
、
SP16-FX supports off-line program. In this mode, programmers don't have to be connected to a
computer. Programmer has a built-in 128Mbit data memory
, eliminating the need for additional storage. Off-
line program is easy and efficient. In this mode, programmers automatically detect the placement of devices,
start programming, and present results via state lights and a built-in buzzer.
Off-line mode includes two methods: manual operation and automatic control:
In manual operation mode, programmer automatically detects placement and removal of device. Indicates
working status and programming result through
state lights and built-in buzzer.
In automatic control mode, connecting to automatic control machine through ISP/ATE multi-function
interface which controls its function and outputs corresponding indication signals.
SP16-F supports off-line manual mode only; SP16-FX supports two modes above, and it can be operated by
any one of them through software settings.
Download off-line data
Before off-line operation, you must download off-line data into programmer by using computer in advance.
The data download operation steps are as follows:
1. First connect programmer to computer with a USB cable and then turn on the FlyPRO software.
2. Select the correct device model.
3. Load files that need to program.
4. Click the menu [Device] - [Off-line Data Management] - [Download Off-line Data] to open off-line data
download
dialog box and download off-line data. As shown below:
