Sofamel OPL Product Technical Specification Download Page 3

Page: 3 / 5

Product Technical Specifications

Model OPL

Strapping tool

Datos sujetos a cambios

2017, Mayo 2

Versión: R2-7.2 COM01

Las especificaciones están sujetas a cambios sin previo aviso.

Thomas Alva Edison, 16-17 -

Pol. Industrial Plans d’Arau - 08787 La Pobla de Claramunt (Barcelona) - Spain

Tel. +34 93 808 79 80 - [email protected]

www.sofamel.com

5 - Tighten the strap manually to correct the position "Strap + plate" assembly.

6 - Hold the tool firmly. The groove of the tensioner must be aligned with the cutting head slot.

7 - Insert the strap into the groove of the tool nose and into the tensioner.

8 - Position the strap completely to the left where the blades are to ensure a proper cut. Ideally, the right side of

the strap should not be left out of the tool. Start tensioning the strap with the tension lever (left lever) holding the

cutting lever firmly (right lever)

9 - If the strap is required to be retensioned, position the tension lever to position B.

Then tighten the strap again.

Summary of Contents for OPL

Page 1: ...l Specifications Model OPL Strapping tool Functionality Tool to tighten and strips cutting Characteristics Raw Material Chromed Stainless Steel Ratchet Mechanism Technical Specifications Dimension 350 mm Weight 1 45 Kg ...

Page 5: ... COM01 Las especificaciones están sujetas a cambios sin previo aviso Thomas Alva Edison 16 17 Pol Industrial Plans d Arau 08787 La Pobla de Claramunt Barcelona Spain Tel 34 93 808 79 80 Info sofamel es www sofamel com 15 Push the tool forward to obtain a complete crimp Then Remove the tool 16 The last stage With a hammer fold in the two ears of the plate ...