19
WARNING! Before starting work, the user should check whether the electrical limits for
helmets correspond to the voltage rating and the category or class of hazards that they
are likely to encounter during use.
5. PRECAUTION IN USE
The helmets should not be used in situations where there is a risk which could partially
reduce its insulating properties. Follow the requirements of the live work organization
instructions.
6. PRECAUTION AFTER USE
If the helmet or face shield becomes dirty or contaminated, particularly their external
surfaces, they should be thoroughly cleaned in accordance with the manufacturer's
recommendations (see 8.)
7. STORAGE AND TRANSPORT
The helmet must be stored and transported in a special transport bag or other protective
packaging. During storage or transport, the face shield should be hidden inside the
helmet. Keep the helmet away from any sources of heat. Protect the helmet against
mechanical damage, compression, sunlight (UV), humidity, exhaust gases, etc. Do not
place the helmet in direct vicinity of windows or car windows. The recommended
storage temperature is (20±15) °C
8
.
CLEANING AND DISINFECTION:
The hard hat and face shield should be cleaned after each use, which enables precise
control and prevents skin irritation of the user. The hard hat should be cleaned only with
soap and water. Do not use any solvents, detergents, and abrasives for cleaning. The
sweatbands must be regularly replaced.
The face shield should be cleaned only with soap and water. After washing, dry the shield
properly. To clean the surface of shield visor, use a microfiber cloth, attached to each
helmet.
WARNING! The face shield can be damaged by certain aggressive chemical substances.
Do not use any solvents or detergents and abrasives to clean the face shield.
9. SPARE PARTS
Parts of the helmet that are very worn or damaged must be replaced with new ones.
The manufacturer provides full service of the product it offers and its dedicated
accessories. The users can replace damaged elements of the helmet by themselves or
send the helmet with a damaged part to the manufacturer.
List of spare parts to be replaced by the user himself:
Summary of Contents for ARMOUR-2 ATPV36
Page 2: ...2 2021 03 e 1 MANUAL DE USO 7 ES OPERATING MANUAL 15 EN ...
Page 3: ...3 1 3 2 1 2 3 Fig 1 Fig 2 1 2 3 Fig 3 1 2 2 1 Fig 4 Fig 5 ...
Page 4: ...4 Fig 6 Fig 7 PROD MM YY UTIL MM YY 1 2 Fig 8 1 2 3 4 5 6 7 ...
Page 5: ...5 Fig 10 Fig 9 Fig 11 1 2 1 2 ...
