Battery replacement
Locate the battery
compartment.
Flex to remove the battery
housing.
Unscrew the 4 screws on the
cover to remove the battery.
Remove and replace the
battery.
1
2
3
4
Technical specifications
Power supply:
1 CR2032 type battery.
Always remove the battery when not in use.
Usable range:
Between 1kV and 10kV
Operating frequency:
50 and 60 Hz
For use:
At Distribution/Transformer substations and cells.
Noise level:
80db at 10 cm
Maintenance
Keep the voltage detector clean.
Carry and store in the carrying case provided with the device.
Prevent any blow. In case of fall, break or detection of any
anomaly, contact SOFAMEL, S.L. for its inspection, repair or
calibration.
Even if it is stored, the voltage detector should be checked
and calibrated by the manufacturer after a maximum of 6
years.
4
