SET UP
CONNECT TO YOUR BLUETOOTH DEVICE
Scan the QR code for direct access to
TRANSIT
XS
Quick & Easy Set Up video
on our website.
1
. Switch TRANSIT
XS
‘ON’.
TRANSIT
XS
comes partially charged and ready to use right out of the
box. Just switch it ‘ON’. If none of the power indicator LEDs comes ‘ON’, plug the TRANSIT
XS
into a USB
Port using the included USB charging cable to charge the integrated battery. No damage will occur to
the speaker or battery if used before full charge.
2
. Press and Hold the Option button
‘∞’
until TRANSIT
XS
begins emitting the Bluetooth pairing
tone. The charge-level indicator LED lights will also begin flashing, indicating TRANSIT
XS
is in Bluetooth
pairing mode and available to connect with your Bluetooth device. NOTE: While in Bluetooth pairing
mode, TRANSIT
XS
will emit the Bluetooth pairing tone every 3 seconds.
3
.
On the phone or device you are connecting, access the Bluetooth settings, turn Bluetooth ‘ON’,
then ‘Add’ or ‘Search’ for devices. When TRANSIT
XS
by Soen appears in the device list, select it. If a
passcode is required, enter “0000”. Once TRANSIT
XS
connects, it will produce the double beep to
confirm successful Bluetooth connection and the LEDs will stop flashing. Time to Rock!
For additional Bluetooth set up help, review the instruction manual that came with the device you are
trying to connect.
NOTE: This is a one-time set up for each device you connect to TRANSIT
XS
. To pair TRANSIT
XS
with
another device, repeat the steps above. TRANSIT
XS
will remember upto 8 devices. After pairing more
than 8 devices, the first device will have to be paired with TRANSIT
XS
again in order to connect with
TRANSIT
XS
.
BLUETOOTH AUTO-RECONNECT
For your convenience, TRANSIT
XS
remembers the device that it pairs with, and will attempt to reconnect
(for 15 seconds) to the last connected device every time it is turned ‘ON’.
If your device is out of range or has its Bluetooth feature turned ‘OFF’, TRANSIT
XS
will not be able to
reconnect automatically. If the connected device goes out of range or loses connection with TRANSIT
XS
,
you can easily reconnect by pressing the OPTION
‘∞’
button.
PLAY AUDIO USING 3.5mm CABLE
Connect the included 3.5mm stereo cable to any audio output device, and plug it into the ‘3.5mm
Audio Input’ jack of TRANSIT
XS
.
NOTE: When the 3.5mm jack is plugged in, Bluetooth will be automatically turned off.
1
2