7
➆
Input the desired period for the trend display (day,
week or month)
(
▼
= down,
▲
= up)
and
confirm
(
)
.
We recommend
selecting a daily trend to
start
with because otherwise the first
measurement value will not be shown in the
trend display until after a week or a month.
➇
Confirm “OK”
(
)
and, as soon as 0.0 flashes
and the bar display is operating, step on the
scale
barefoot
.
If the input data are to be changed again
before the first analysis, you can jump
back to height with the
▼
/
▲
keys.
The first measurement is indispensable for
storing the data for later automatic person
recognition. If you dont step on the scale the
message “ERROR” appears in the display and
the data input must be repeated.
.
After you have stepped on the scale, the first
body analysis will be performed as described on
the following pages.
The scale has a time-out mode. It switches back
to the time after about 40 seconds if the keys are
not touched.
Data is retained even when batteries are
changed.
Body analysis
Analysis is only possible barefoot.
Personal data must have been input in
advance. For meaningful results, step on
the scale unclothed whenever possible
and always under the same conditions.
➀
Step on the scale. Your weight is then displayed
and, as long as the display lasts (~5 sec.), so is a
bar display. Hold still until the analysis is
completed.
➁
After automatic personal recognition the display
once more shows the body weight, the proportions
of fat (
), water (
), and musceles (
) in the
body and the energy consumption (
kcal
).
The normal range of the relevant person lies in the
3 middle sections of the bar display.
normal
normal
normal
normal
!
BA_comfort_470_065_267_USA3.qxd 13.01.2006 17:45 Uhr Seite 7