3.0 Application programs
The various application programs on the Soehnle Basic Terminal 3010 offer you a wide range of
solutions for weighing operations.
You can modify the application programs to your specific requirements in Setting mode
(see separate description 470.702.078 User Mode).
Below is a list of application programs available to you:
3.1. Weighing and taring
3.2. Counting
3.3. Totalising
3.4 Batching
3.5 Withdrawal weighing
3.6. Switching point programming
3.7. Checking
3.8 Dosing
3.1 Weighing and taring
Weighing
The appliance starts in Weighing mode after power-on.
Place weighing product on platform and read weight
Weighing with tare
Refer to 2.5.
An active tare weight is indicated by the letter "N" appearing in the display.
3.2 Counting
The counting function is activated by pressing the Counting key.
The message "Add XXX" (XXX=number of reference parts) requests you to
place one or several reference parts on the platform. By pressing the Counting
key repeatedly, you can change the reference quantity for lightweight reference
parts in steps of 1/2/5/10/25/50.
Place the reference parts on the platform and confirm by pressing the
-key.
Then place the countable parts on the platform and read off the countable
parts.
Change to Weighing mode by pressing the CL key.
Counting with tare
Refer to 2.5.
An active tare weight is indicated by the letter "N" appearing in the display.
English
1
13
3
Ba_3010_GB.qxd 03.04.2008 17:07 Seite 13
