DD2 MANUAL
ADJUSTMENT OF THE CAMBER
USE THE ECCENTRICS AT THE BOTTOM:
MORE POSITIVE
MORE NEGATIVE
RIGHT
LEFT
RIGHT
LEFT
FIG 3
FIG 4
STANDARD ADJUSTMENT (Corresponds to fig4)
Eccentrics at the bottom:
¾
The mark is positioned towards the
outside of the chassis.
Eccentrics at the bottom :
¾
The mark is positioned towards
the inside of the chassis.
INCREASE THE CAMBER (fig 4)
¾
Use the same position fig 4 and change the eccentric of 1° by the eccentric of 2°.
REDUCE THE CAMBER (fig 3)
¾
Use position fig 3.
FOR HIGH DEGREES ECCENTRICS TO BE USED IN EXTREME CONDITIONS,
REFER TO THE ITAKA CATALOGUE
NOTE:
-
Some negative camber generally improves the performances of the DD2.
- 20 -
Summary of Contents for Sigma DD2
Page 1: ...USER MAINTENANCE GUIDE DD...
