8
8
ASSEMBLY
2
–
ASSEMBLY OF THE SLIDES TO THE POSTS
NECESSARY
ITEMS
THE SLIDING BAR WITHOUT WINCH
THE SLIDING BAR WITH WINCH
Turn
-
knob M10
Sliding bar
U piece
Screw M5x50
+ washers 5
+ nut M5
Sliding bar
U piece
Turn
-
knob M10
The sliders must be situated on the inside of
the court, once the posts are installed
-
Fixation the winch on the sliding bar.
-
Remove screw M5.
-
Put the sliding bar in the rail
-
Lock the sliding bar by tighten the turn knob
and U piece
-
Put again the screw M5 without tightening it
Tighten the screw M5 loosely, in order not to
damage the rail. This screw acts as a stopper
to prevent the slider from exiting the rail
-
Remove screw M5.
-
Put the sliding bar in the rail
-
Lock the sliding bar by tighten the turn knob
and U piece
-
Put again the screw M5 without tightening it
The sliders must be situated on the inside of
the court, once the posts are installed
X4
W
as
he
rs
5
X2
N
ut
s
M
5
X2
S
cr
ew
s
M
5x
50
X2
Tur
n
-
kn
ob
M
10
X2
U
piec
es
Tighten the screw M5 loosely, in order not to
damage the rail. This screw acts as a stopper
to prevent the slider from exiting the rail
Screw M5x50
+ washers 5
+ nut M5
