Sodex Sport S14090GC Product Sheet Download Page 1

DETAILS

 

SODEX INTERNATIONAL

 

18 rue de l

Avenir 

-

 Bât. 224

 

14650 CARPIQUET

 

Tel : + 33 (0) 2.31.53.78.70

 

Email: [email protected]

 

 

DESCRIPTION

 

Steel structure

 

Plastified

 

 
 

CONFORM

 

European standard

 

NF EN 1270

 

Decree

 

SPORT

S LAW 2007

 

PRODUCT SHEET

 

BASKETBALL 4 GOALS TOWER

 

PRODUCT REF 

:

 

S14090GC

 

UNIT

 

SPORT

S LAW 2007

 

 

According to the decree above, for the first installation the goal must be tested like below :

 

Put a vertical and static charge of 320 kg, at the jonction of the pannel and the basket , at 0.20m of the ground, du-

ring one minute.

 

During the first installation, this stability and solidity test is compulsory. 

 

Every time that the equipment is assembled, a visual check of the stability and solidity must be realized. 

 

The owner must regularly check the condition of the product.

 

MAINTENANCE

 

 

The equipement has to be regularly maintained by the owner. It is adviced to:

 

-

 Check every week that all the screws are correctly tightened

 

-

 Fix paint defects if the module has been damaged, using the adapted paint, specified by the manufactu-

rer.

 

-

 Replace all damaged or missing parts with a spare part recommended by the manufacturer. 

 

-

 Clean the product by using dishwasher soap, clean water, and soft cloth.

 

WARRANTY

 

One full year parts and labor guarantee. Every claim regarding condition of the delivered equipment has to 

be done within the legal period of the reception of the material. The warranty will not apply to:     

 

-

    all degradation during the transport.     

 

-

    all degradation due to use differing from which was intended.

 

-

    all degradation due to poor maintenance.     

 

-

    any defect claimed after the end of the legal period.     

 

-

    any damaged due to a faulty installation and assembly of the module

 

THIS PRODUCT HAS BEEN BUILT AND DESIGNED ACCORDING TO THE FRENCH AND EUROPEAN STANDARD NF EN 1270

 

 

Summary of Contents for S14090GC









Reviews: