38
DELPHYS MX 250-900
- Ref.: OPMDELMX1010-GB_01
L
OCAL
/ R
EMOTE
The UPS can be connected to a remote equipment. By default the control panel has the master function while the
remote control has the slave function (all controls are inhibited). Through this menu, controls can be sent from the
remote equipment.
CONFIGURATION:LOCAL-REMOTE
Switch to: LOCAL MONITORING
Cancel
Validate
ESC
ENTER
7. 2.9. JBUS link
note:
the JBUS link menu is only displayed if the setting is available on the UPS.
Configuration parameters are:
•
the baudrate (1200 to 19200),
•
the parity (none, even, odd),
•
the slave number (001 to 255).
PROGRAMMING 1
baudrate:
19200
Parity: NONE
Slave: 001
JBUS LINK
↓
If a second JBUS link is available, the corresponding screen is automatically displayed after completing the setting
of the first JBUS link.
7. DESCRIPTION OF THE MENUS
