background image

PACKAGE CONTENTS & SYSTEM REQUIREMENTS 

 

Package 

1.  Manual (this document) 

2.  Drivers and configuration utilities on CD-ROM 

3.  Quick Install Guide 

If you miss any of these items please contact your reseller. 
 

System Requirements 

 

 

PDA with Windows®

 

Pocket PC 2002 and 2003 with at least 32 MB memory 

 

Secure Digital (SD) slot (Assuming SDIO host controller and driver are already installed) 

 

Microsoft®

 

Active Sync®

 

should be installed 

 

An IEEE802.11b or Wi-Fi approved Access Point/Base station

 

INTRODUCING SDIO WIRELESS LAN CARD 

The WL6207 is a wireless network card that complies with the IEEE 802.11b standard on wireless LANs 
(Revision B).

 

WL6207 features and benefits 

• 

 Wi-Fi (Wireless Fidelity) certified. 

• 

Supports data rates up to 11 Mbps. 

• 

Fully compatible with any other wireless LAN system based on Direct Sequence Spread Spectrum (DSSS) 
radio technology that complies with the “IEEE 802.11b standard on wireless LANs (Revision B)”. 

• 

Automatic Transmit Rate Select mechanism in the transmit range of 11, 5.5, 2 and 1 Mbps. 

• 

 128 bit Wired Equivalent Privacy (WEP) data encryption and WPA support

.

 

• 

 Efficient Power Management. 

• 

Roaming over multiple channels. 

• 

Working range up to 400 meters in an open environment.

 

• 

Supports Ad-hoc and infrastructure modes for easy wireless communication. 

WL6207 Wireless Network Scenarios 

 

• 

The WL6207 enables you to: 

• 

Connect your computer to a Peer-to-Peer workgroup of wireless computing devices 

• 

Connect your computer to a Small Office/Home Office (SOHO) network that includes Wi-Fi access 
points. 

• 

Connect your computer to a Local Area Network (LAN) Infrastructure that includes the WL6207, or 
other IEEE 802.11b compliant LAN systems 

 
Wireless stations can be equipped with the WL6207, but also with other WLAN PC Cards. Both the 
WL6207 and the WLAN PC Card share the same wireless functionality. 

 

4

Summary of Contents for WL6207
















Reviews: