28
OnBoard FDC
This item enables or disables the onboard
floppy disk drive interface.
OnBoard Serial
PortA
These items enable or disable the onboard
COM1 serial port, and assign a port address.
OnBoard IR Port
This item enables or disables the Infrared
port, and assigns a port address. If you select
a specific address, the resources are assigned
to the IR port, and you can use the five items
below to determine the operation of the IR
port
Onboard Parallel
Port
This item enables or disables the onboard
LPT1 parallel port, and assigns a port
address. The Auto setting will detect and
available address.
Parallel Port Mode
This item decides the parallel port mode. You
can select SPP (Standard Parallel Port), ECP
(Extended Capabilities Port), EPP (Enhanced
Parallel Port), or ECP + EPP.
Parallel Port IRQ
This item assigns either IRQ 5 or 7 to the
parallel port.
Parallel Port DMA
This item assigns a DMA channel to the
parallel port. The options are 0, 1 and 3.
OnBoard IDE
This item enables or disables either or both of
the onboard Primary and Secondary IDE
channels.
Ethernet Device
This item enables or disables the onboard
Ethernet LAN(Optional).
Audio Device
This item enables or disables the onboard
AC’97 audio chip.
Modem Device
This item enables or disables the onboard
AC’97 modem chip.
USB Controller
Enable this item to select the USB ports or
disable.
USB Device
Legacy Support
This item enables the USB device, if you
have installed a USB device on the system
board.
Summary of Contents for MS8158D Series
Page 4: ...IV ...
