IV
. SETTING MODES AND FUNCTIONS :
For entering into the system setting mode, first press #, then press
system password and press # subsequently to enter into system
setting mode. By pressing # XXXX # (X X X X representing 4 digits
system password). After entering into system setting mode, the
STATUS light (yellow light) on the panel will be turned on. On the
display panel, it will shows:
Proximity Reader has been commenced to wait for user to enter
functional selection. If user does not key in any enter in 20 seconds,
the proximity Reader will automatically terminate the system setting
mode function.
1.
Add one car d :
To register user’s card and utilize proximity to
register.
In the above operation, if “
*
” is being activated, the card rgistration
activities will be terminated.
S Y S T E M F U N C T I O N
S E L E C T I O N
P. 4
PRESS
1
1 BEEP
SOUND
CARD
PROXIMITY
ENTER
“
#
” SYSTEM
PASSWORD “
#
”
STATUS LIGHT ON
WITH A BEEP SOUND
SYSTEM FUNCTIONS
SELECTION:
ADD ONE CARD
XXXXXXXX
ADD ONE CARD
ˍ
ADD ONE CARD
ACCESS DENIED
WILL BE SHOWN
ON SCREEN
WILL BE SHOWN
ON SCREEN
8 DIGITS CARD
NUMBER WILL BE
SHOWN ON
SCREEN
3 BEEP
SOUND
REGISTRATION
SUCCESSFUL
REGISTRATION
UNSUCCESSFUL
(REPEAT REGISTRATION)
WILL BE SHOWN
ON SCREEN
PRESS
*
TERMINATE