www.looket.com
User Guide Manual - 26
4.1.5.
How to check or re-set GPS hardware
1. Tap Settings on Main menu and then click GPS hardware.
2. Check Turn GPS module button for activation GPS module.
(The icon should be same with the following picture.)
3. Tap 'Autodetect' to search COM port and baud rate automatically
and t hen w ait to f ix it . Or s et f ollowing C OM po rt and def ault
baud rate by yourself after tap COM port and Baud rate.
COM port: COM3 / Baud rate: 9600
4.1.6.
How to set TMC
The Looket N670 c onnected with an ext ernal TMC antenna is only
available for TMC service.
1. Click Settings on Main menu and then tap GPS hardware.
2. Select Wizard and autodetect GPS receiver port.
3. Tap yes when you are asked, "Do you have TMC receiver?".
4. Click GNS and set following COM port and baud rate.
COM port: COM2 / Baud rate: 38400
Summary of Contents for LOOKET N6
Page 1: ...ver1 6 User Guide Manual...
