SOARNEX EM220 series, Quick Installation Manual

Page: 3 / 10

English
Rev1.0 2015 Nov
Selecting a Site for the Equipment
Installation
As with any electric device, you should place the equipment
where it will not be subjected to extreme temperatures, humidity, or
electromagnetic interference. Specifically, the site you select should
meet the following requirements:
1. The ambient temperature should be between 32 and 104 degrees
Fahrenheit (0 to 40 degrees Celsius).
2. The relative humidity should be less than 90 percent, non
condensing.
3. Surrounding electrical devices should not exceed the
electromagnetic field (RFC) standards for IEC 801 3, Level 2 (3V/M)
field strength.
4. Make sure that the equipment receives adequate ventilation. Do
not block the ventilation holes on each side of the switch or the fan
exhaust port on the side or rear of the equipment.
5. The power outlet should be within 1.8 meters of the switch.
This chapter gives step-by-step installation instructions for the Smart
Media Converter.
Connecting to Power
1. This Converter is a plug-and-play device.
2. Connect the supplied AC to DC power adaptor with a power
voltage of 5Vdc/1Amp to the DC-Jack on the converter, and then
attach the plug into a standard AC outlet.