25
-
Work slowly and carefully, particularly on uneven or unsurfaced paths or when
you are moving backwards.
Assembly Overview
(fig.1)
1. 2-point safety switch
2. Cable clip
3. Handle shaft upper part
4. Finger screw
5. Handle shaft lower part
6. Ejection channel
7. Rotor
8. Wheel
9. Motor housing
10. Ejection channel rod
11. Cable tension relief
12. Adjusting rod for eject channel
Contents of the Package
1x Rotary snowplough incl. 2-point safety switch
1x Handle upper part
1x Handle lower part
1x Ejection channel incl. adjusting rod
1x Hinged flap incl. wing nuts
1x Small parts bag (cable clips, finger nuts, cable tension relief)
1x Wooden stick
1x Screwdriver
1x Manual
Areas of Application
The product you have bought is approved for use exclusively as follows:
-
Correct clearing of snow in private roadways, entrances and car parks, as long as these
are not subject to the General Traffic Regulations (for example public footpaths or
vehicle entrances. For this it may be necessary to apply for a permit from the state
authority responsible).
-
The material to be cleared is fresh snow only. Misuse with regard to other materials is
explicitly forbidden and can in no way be the subject of complaint or claim regarding
personal injury or damage.
Technical Data
Model
SF 1600
Voltage
230 V ~ 50 Hz
Power consumption
1.600 W