6
GETTING STARTED
The SLTough 6 can be used right out of the package,
please test the water seal prior to exposing to liquids.
1. Remove any case or accessory that may be on
or connected to your iPhone, including
polyurethane and protective screen films. These
protective films can cause difficulty in removing
the phone from the case.
2. Release the 2 side locks on the left and right
side of the case. Rotate away from the case.
3. Grasp the lanyard loop at the bottom of the
SLTough and pull upwards to release the back
panel from the front.
4. Insert the iPhone 6/6S into the case
5.
IMPORTANT!
Make sure the mute knob engages
the mute button on the phone.
6. Re-seal the back cover to the front and engage
the 2 side lock latches. Your iPhone is now
protected and sealed.
