6
Unpacking
Carton Contents
• Electric pole chain saw
• 8 in. (20.3 cm) cutting chain
• 8 in. (20.3 cm) guide bar
• Hex key + blade screwdriver
• Cutting bar sheath
• Manual with registration card
1. Carefully remove the pole chain saw and check to see that
all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563
).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new electric pole
chain saw. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suffocation risk!
Assembly
m
WARNING!
Always wear heavy-duty gloves when
handling the bar and chain. Mount the bar and chain very
carefully so as not to impair the safety and efficiency of the
machine. If in doubt, contact an authorized Snow Joe
®
+
Sun Joe
®
dealer or call the Snow Joe
®
+ Sun Joe
®
customer
service center at 1-866-SNOWJOE (1-866-766-9563).
m
WARNING!
Unpacking and assembly should be
completed on a flat and stable surface, with adequate space
for moving the machine and its packaging.
m
DANGER!
Never start the motor before installing the
guide bar, chain, and sprocket cover. Without all these parts in
place, the clutch can fly off or explode, exposing the user to
potentially serious injuries.
m
WARNING!
To avoid serious personal injury, read and
understand all safety instructions provided.
m
WARNING!
Before performing any maintenance, make
sure the tool is unplugged from the power supply. Failure to
heed this warning could result in serious personal injury.
Inst Replacing the
Guide Bar + Chain
Tools and supplies required:
•
Hex key + blade screwdriver (supplied)
• Heavy-duty work gloves
NOTE: When replacing the guide bar and chain, use only
identical replacement parts. Make sure the pole chain saw is
disconnected from the power supply before proceeding with
installation.
1. Using the Hex key + blade screwdriver, unscrew the
sprocket cover bolt and remove the sprocket cover
(Fig. 1). The sprocket cover will retain the bolt.
2. Remove the cutting bar and chain from the mounting
surface (Fig. 2).
Fig. 1
Hex key
Sprocket cover bolt
R
Fig. 2
Sprocket
cover bolt
Sprocket
cover
Chain
Cutting bar
Summary of Contents for SUNJOE SWJ804E-RM
Page 18: ...17 NOTES ...
Page 20: ...snowjoe com ...
