14
Using the Equipped Attachments
The unit is equipped with 4 attachments: utility nozzle, wet/
dry floor brush, crevice nozzle, and wet/dry furniture brush.
Choose different attachment based on the specific cleaning
project you are working on.
1.
The wet/dry floor brush can be adjusted to extend out or
retract in. Simply follow the symbol on the brush switch to
adjust the brush (Fig. 22).
2. The crevice nozzle can be stored inside of the unit with the
dust tank being removed (Fig. 23). Make sure to remove
the stored crevice nozzle and lock in the dust tank before
using the unit.
Clean the Dust Tank
The dust tank needs to be cleaned every time after using to
avoid deterioration and obstructing air flow, which will reduce
the performance of the vacuum. Follow the instructions below
to clean the dust tank
1.
Switch off and unplug the unit.
2. Push the dust tank lock inside and pull out the dust tank
at the same time (Fig. 24).
3. Grab the dust tank handle and turn counterclockwise, the
dust tank
cap with filter will be removed from the dust bin
(Fig. 25).
4. Remove any debris or dust from the dust bin. Rinse the
dust bin with warm water if needed. Replace it back and
lock securely before using.
Storage
m
CAUTION!
Always store your pressure wet/
dry vacuum in a location where the temperature will not fall
below 32ºF (0ºC). The pump in this machine is susceptible to
permanent damage if it freezes. FREEZE DAMAGE IS NOT
COVERED BY THE WARRANTY.
• Store the pressure washer
+ wet/dry vacuum indoors
in a dry, covered area where it is not subject to adverse
weather conditions.
•
It is important to store this product in a frost-free area.
•
Always empty water from the dust bin, all hoses, the
pump, and the detergent bottle (if using) before storing.
Fig. 22
Brush adjustment
switch
Fig. 23
Crevice nozzle
Fig. 24
Dust tank
Dust tank handle
Dust tank
lock
Fig. 25
Dust
bin
Dust tank cap
with filter
Summary of Contents for SUNJOE SPX7000E-RM
Page 20: ...snowjoe com ...
