SNOWJOE SUNJOE SPX4001-RM Operator'S Manual Download Page 4

4

  plug still does not fit, contact a qualified electrician to 

install the proper wall outlet. Do not modify the appliance 

plug, power cord receptacle, or power cord plug in any 

way. 

6.  To prevent the appliance cord from disconnecting from the 

extension cord during operation, make a knot with the two 

cords as shown in Table 1.

7.  Do not abuse the cord. Never pull the pressure washer 

by the cord or yank the cord to disconnect it from the 

receptacle. Keep the cord away from heat, oil, and  

sharp edges.

Risk of Electrocution

•  Inspect cord before using.
• 

Do not use if cord is damaged.

•  Keep all connections dry and off the ground.
• 

Do not touch plug with wet hands.

• 

Keep cord away from heat and sharp edges.

•  Do not spray electrical apparatus and wiring.

Risk of Explosion

•  Do not spray flammable liquids.
•  Do not use acids, bases, solvents, or any flammable 

material in this product. These substances can cause 

physical injuries to the operator and irreversible damage to 

the machine.

Additional Safety Instructions

•  High-pressure: keep clear of nozzle.
•  Injection hazard: equipment can cause serious injury if the 

spray penetrates the skin.

•  Do not point the gun at anyone or at any part of the body.
•  In case of skin penetration, seek medical aid immediately.
•  Before servicing, cleaning, or removing any parts, shut off 

the power and relieve pressure.

•  This machine is not suitable for connection to the potable 

water mains.

Product Description

Purpose

•  This high-pressure electric power washer is intended for 

residential use to clean vehicles, machines, buildings, 

facades, etc.

Areas of Application

•  Never use the machine in potentially explosive areas under 

any circumstances!

•  The operating temperature must be between 32ºF (0

ºC) and 

104ºF (40ºC).

•  The machine consists of an assembly with a pump, which 

is encased in a shock-absorbing housing. To provide the 

operator with an optimal working position, the machine is 

equipped with a spray wand and a non-slip handle grip, 

whose shape and configuration comply with applicable 

regulations. 

•  Do not cover or modify the spray wand or the spray nozzles 

in any way.

•  The high-pressure electric power washer is designed to be 

used with cold or lukewarm water; higher temperatures can 

damage the pump.

•  Do not use water that is dirty, gritty, or contains any 

chemical products, as these could impair operation and 

shorten the life of the machine.

m

          

WARNING 

 

m

Electric shock may cause SEVERE INJURY or 

DEATH. Heed these warnings:

•  Do not allow any part of the electric pressure washer 

to make contact with water while it is in operation. If 

the appliance becomes wet while turned off, wipe dry 

before starting. 

•  Do not use an extension cord over 25 ft. The 

pressure washer comes equipped with a 35 ft power 

cable. Combined cord length must not exceed 60 ft. 

Any extension cord must be 14-gauge (or heavier) to 

safely power the pressure washer.

•  Do not touch the appliance or its plug with wet hands 

or while standing in water. Wearing rubber boots 

offers some protection. 

EXTENSION CORD CHART

Cord Length:

Min. Wire Gauge (A.W.G.):

25 ft (7.6 m)

14

(B) Connect plug and receptacle

Cord set

Appliance cord

(A) Tie cord as shown

Table 1. Method of Securing Extension Cord

Summary of Contents for SUNJOE SPX4001-RM



















Reviews: