background image

3

4. 

To prevent the appliance cord from disconnecting from 

the extension cord during operation, use the onboard 

extension cord restraint hook and/or make a knot with the 

two cords as shown in Table 1.

5.  Do not abuse the cord. Never pull the edger + trencher 

by the cord or yank the cord to disconnect it from the 

receptacle. Keep the cord away from heat, oil, and sharp 

edges.

Double-Insulated Appliances

In a double-insulated appliance, two systems of insulation 

are provided instead of grounding. No grounding means is 

provided on a double-insulated appliance, nor should a means 

for grounding be added to the appliance. Servicing a double-

insulated appliance requires extreme care and knowledge 

of the system, and should be performed only by qualified 

service personnel at an authorized Snow Joe

®

 + Sun Joe

®

 

dealer. Replacement parts for a double-insulated appliance 

must be identical to the parts they replace. A double-insulated 

appliance is marked with the words “Double Insulation” or 

“Double Insulated.” The symbol     (square within a square) 

may also be marked on the appliance.

    DOUBLE-INSULATED: GROUNDING NOT  

 

                  REQUIRED. WHEN SERVICING, USE ONLY    

                 IDENTICAL REPLACEMENT PARTS.

This electric edger + trencher is double-insulated, eliminating 

the need for a separate grounding system. Use only identical 

replacement parts. Read the instructions before servicing 

double-insulated appliances. Use this electric edger + trencher 

only as described in this manual. 

Service

1.  If your electric edger + trencher requires service, 

contact an authorized Snow Joe

®

 + Sun Joe

®

 dealer or 

call the Snow Joe

®

 + Sun Joe

®

 customer service center 

at 1-866-SNOWJOE (1-866-766-9563). Only identical 

replacement parts should be utilized for repairs. This will 

ensure that the safety of the power tool is maintained.

(B) Connect plug and receptacle

Cord set

Appliance cord

(A) Tie cord as shown

Table 1. Method of Securing Extension Cord

Summary of Contents for Sunjoe SJEDGE7

















Reviews: