background image

5

Unpacking

Carton Contents:

• 

Reel mower body

• 

Upper handle

•  Middle handle bar (2)
•  Lower handle
•  Handle knob and bolt (6)
•  Grass catcher
•  Hex wrench
•  Paper test strips (20)
•  Manual with registration card

1.

  Carefully remove the manual reel mower and check to see 

that all of the above items are supplied.

2.

  Inspect the product carefully to make sure no breakage or 

damage occurred during shipping. If you find damaged or 

missing parts, DO NOT return the unit to the store. Please 

call the Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563).

 

NOTE:

 Do not discard the shipping carton and packaging 

material until you are ready to use your new manual reel 

mower. The packaging is made of recyclable materials. 

Properly dispose of these materials in accordance with 

local regulations.

IMPORTANT!

 The equipment and packaging material are  

not toys. Do not let children play with plastic bags, foils, 

or small parts. These items can be swallowed and pose a 

suffocation risk!

Assembly

Fitting the handle

NOTE:

 Do not tighten the knobs completely until assembly is 

complete.

1. 

Secure the two middle handle bars to the upper handle 

using the first set of knobs and bolts provided. Tighten the 

knobs on each side to ensure a secure fit (Fig. 1).

2. 

Attach the upper and middle handle assembly to the lower 

handle using the remaining knobs and bolts provided. 

Tighten the knobs on each side to ensure a secure fit 

 

(Fig. 2).

Upper handle

Middle 

handle 

bars

Knobs

Bolts

Fig. 1

Fig. 2

Upper and 

middle 

handle 

assembly

Lower handle

Knobs

Bolts

Bolts

Summary of Contents for Sunjoe MJ501M













Reviews: