background image

14

3.  To power on, press and hold the safety lock button while 

puling the switch bar lever toward you (Fig. 15). Once the 

machine powers on, release the safety lock button and 

proceed with operation. The lawn mower can only be 

started by pressing the safety switch button first, followed 

by squeezing the ON/OFF switch bar lever; reverse 

operation will not start the machine.

4. 

To power off, release the ON/OFF switch bar lever 

 

(Fig. 15).

Grass Bag Filling Level Indicator

1. 

The grass bag is equipped with a filling level indicator 

window that is opened by the air flow that the lawn 

mower generates during operation (Fig. 16).

2. 

If the flap closes during mowing, this indicates that the 

grass bag is full and must be emptied (Fig. 16).

NOTE: 

To ensure that the filling level indicator functions 

properly, keep the holes under the flap clean and permeable.

Mowing Tips

m

WARNING! 

Inspect the area prior to mowing and 

remove all the stones, sticks, wires, and other foreign objects 

that could be picked up and thrown by the rotating blade. 

Failure to comply not only will damage the mower blade, but 

can also lead to serious personal injury. 

•  Be sure to check the mowing blade periodically for signs 

of wear and sharpen it at least once per year, as described 

in the maintenance section. 

  NOTE: A sharp blade will greatly enhance the 

performance of the mower, especially when cutting tall 

blades of grass. 

•  When cutting thick grass, reduce your walking speed 

in order to allow for a more effective cut and a proper 

discharge of the clippings. For a healthy lawn, always cut 

off one-third or less from the total length of the grass. The 

average lawn should be approximately 1.5 in. to 2 in. (3.8 

cm to 5 cm)  long during cool months, and more than 2 in. 

(5 cm) long during hot months. If there is growth, the lawn 

should be cut in the fall.

•  The lawn will look better if it is always cut to the same 

height and in alternate directions.

Fig. 14

Battery cover

Battery

Safety key

Fig. 15

Switch bar lever

Safety lock button

STOP

GO

Fig. 16

Grass indicator window

Summary of Contents for sunjoe iON16LM-CT-RM





















Reviews: