13
2.
Take off the cutting bar sheath.
3.
Make sure the guide bar is not touching the ground or
any other object.
4.
Disengage the chain brake by pulling the front hand
guard towards the front hand grip (Fig. 14).
5.
Hold the chain saw firmly with both hands.
6.
Press the safety lock button, then pull the trigger switch
(Fig. 14).
NOTE:
You can now take your thumb off the safety lock
button and just hold down the trigger switch and saw
will run.
NOTE:
When you release the trigger switch, the safety lock
button is also released and the engine stops.
Stopping the Machine
1.
Release the trigger switch (Fig. 14).
2.
Lift the push lock button and pull out the battery (Fig. 9).
Operating Tips
m
WARNING!
For your safety and that of others:
1.
Do not use the machine without reading the instructions
carefully. Become acquainted with the controls and
the proper use of the machine. Learn how to stop the
machine quickly.
2.
Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
3.
Always wear suitable clothing when using the machine.
Wear anti-vibration gloves and other personal protective
equipment.
All the above-mentioned precautions do not, however,
guarantee the prevention of certain risks – i.e. Raynaud’s
phenomenon or Carpal tunnel syndrome. For operators
who use this machine for prolonged periods, it is
therefore recommended to have periodic checkups on
their hands and fingers. If any of the above mentioned
symptoms should appear, please contact a physician
immediately.
4.
Work only in daylight or good artificial light.
5.
Take utmost care when working near metal fences.
6.
Take care not to hit the bar hard against foreign objects or
flying debris caused by the movement of the chain.
7.
Stop the motor and remove the battery from its
compartment:
–
whenever you leave the machine unattended;
–
before cleaning, checking or servicing the machine;
–
after striking a foreign object. Inspect the machine for
any damage and make repairs before restarting it
again;
–
if the machine begins to vibrate abnormally,
immediately look for the cause of the vibrations
and have the machine inspected at an authorized
Snow Joe
®
+ Sun Joe
®
dealer or call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563) for asistance.
–
when the machine is not in use.
IMPORTANT!
Always remember that an incorrectly used chain
saw may disturb others and have a serious impact on the
environment.
To respect people and the environment:
• Avoid using the machine in environments or at times of
the day when it may disturb others.
• Scrupulously comply with local regulations and provisions
for the disposal of waste materials after sawing.
• Scrupulously comply with local regulations and provisions
for the disposal of oils, damaged parts or any elements
which have a strong impact on the environment.
• A certain amount of chain lubricating oil is released into
the environment when the machine is running, so only use
biodegradable oils made specifically for this use.
• To avoid the risk of fire, do not leave the machine with the
engine hot on leaves or dry grass.
m
WARNING!
It takes specific training to use the machine
for felling and delimbing.
m
WARNING!
Prolonged exposure to vibrations can
cause injuries and neurovascular disorders (also called
“Renaud’s syndrome” or “white hand”), especially to people
suffering from circulation disorders. The symptoms can
regard the hands, wrists and fingers and manifest with loss of
sensitivity, torpor, itching, pain and discoloring of or structural
changes to the skin. These effects can be worsened by low
ambient temperatures and/or by gripping the hand grips too
tightly. If the symptoms occur, the length of time the machine
is used must be reduced and a doctor consulted.
R
Fig. 14
Front hand
guard
Safety lock
button
Trigger switch
Summary of Contents for Sunjoe iON16CS-RM
Page 24: ...snowjoe com ...
