13
Handle Assembly
1.
The unit arrives with the handle frame folded down in
storage position. To unfold the handle, press down the
handle latch and flip up the handle frame until the handle
frame clicks into working position (Fig. 8).
2. Press down the handle releasing button located on the
middle bar of the handle frame, meanwhile pull the upper
handle frame to extend it to full length (Fig. 9).
Grass Collection Bag Fitting
1.
Lift the ejector flap up, and remove the mulching plug
inserted in the rear discharge opening.
2.
With the ejector flap lifted up, hold the grass collection
bag by the handle and hook the ends of the support rod
on the hooks on both sides (Fig. 10).
3. Release the
ejector flap
so that it rests on the grass bag.
(Fig. 11).
Side Discharge Chute As Fitting
Use the side discharge chute on your mower when the grass is
too tall to mulch or when side discharging is preferred.
The grass clippings produced by the side discharge chute are
noticeably larger than those produced by the mulching plug.
NOTE: When using the side discharge chute, do not assemble
the grass collection bag. Insert the mulching plug in the rear
discharge opening.
1. Lift up the side discharge door.
2. Align the grooves on the side discharge chute with the
pins on the underside of the door, and hook the grooves
on the pins (Fig. 12).
Fig. 8
Handle
latch
Handle
frame
Fig. 9
Upper handle
frame
Handle
releasing
button
R
Fig. 10
Ejector flap
Grass collection bag
Hook (on
both sides)
Support
rod
Fig. 11
Ejector flap
Grass
collection
bag
