9
Technical Data
Motor ...............................................................................
150 W
Battery Voltage Max
*
.................................................. 24V D.C.
Max Water Inlet Temperature
................................ 104º
F/40
ºC
Intake Hose Length ..............................................
5.9 ft (1.8 m)
Max Flow Rate .........................................
330 GPH (1,250 l/hr)
Max Head Height ................................................
52 ft (15.8 m)
Max Suction Lift ........................................................
13 ft (4 m)
Fittings ...........................................................
3/4 in. GHT male
Enclosure ........................................................................ Type 2
Net Weight
...........................................................
4 lbs (1.9 kg)
* Initial no-load voltage, when fully charged, peaks at 24 volts; nominal voltage
under typical load is 21.6 volts.
Unpacking
Carton Contents
•
Cordless transfer pump
•
Puddle strainer
•
Intake hose
•
Oil bottle
• M5 tapping screws (4)
• O-ring
•
Rubber Impeller
•
Manual with registration card
NOTE: In order to operate this cordless transfer pump you will
need iON+ 24V System batteries and chargers. See page 15
for battery options and specifications, or visit sunjoe.com.
1. Carefully remove the transfer pump and check to see that
all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new cordless
transfer pump. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suffocation
risk!
m
WARNING!
Do not insert battery until assembly is
complete. Failure to comply could result in accidental starting
and possible serious personal injury.
Battery Pack Operation
The equipment is powered by a lithium-ion battery. The battery
pack is completely sealed and maintenance free.
Battery Charge Level Indicator
The battery pack is equipped with a push button for checking
the charge level. Simply press the push button to read off the
battery charge level from the LEDs of the battery indicator:
• All 3 level monitoring LEDs are lit: Battery charge level
is high.
• 2 level monitoring LEDs are lit: Battery charge level is
decreasing. Stop work as soon as possible.
• 1 level monitoring LED is lit: Battery is flat. Stop work
IMMEDIATELY and charge the battery. Otherwise the
battery’s service life will be greatly shortened.
NOTE: If the charge level button does not appear to be
working, connect to the charger and charge as needed.
In order to operate this cordless transfer pump you will need
a iON+ 24V System battery and charger. See page 15 for
battery and charger options and specifications, or for more
information visit sunjoe.com.
TOOL ONLY
B CHARGER SOLD SEPARATELY
Charge level button
The battery is at 30% capacity
and requires charging
The battery is at 60% capacity
and requires charging soon
The battery is at full capacity
Light Indicators
Lights
