9
NOTE: If the charge level button does not appear to be working,
connect the battery with the charger and charge as needed.
NOTE: Immediately after using the battery packs, the charge
level buttons may display a lower charge than they will if
checked a few minutes later. The battery cells “recover” some
of their charge after resting.
Charger Operation
m
WARNING!
Charge only 24V iON+ lithium-ion battery
packs with its compatible 24V iON+ lithium-ion charger. Other
types of batteries may cause personal injury and damage.
To reduce the risk of electric shock, do not allow water to flow
into the charger's AC/DC plug.
When to Charge the iON+ 24V Lithium-
Ion Batteries
NOTE:
The iON+ 24V lithium-ion battery packs do not develop
a "memory" when charged after only a partial discharge.
Therefore, it is not necessary to run down the battery pack
before connecting it with the charger.
• Use the battery charge indicator lights to determine when to
charge your iON+ 24V lithium-ion battery packs.
• You can "top-off" your battery packs' charge before starting
a big job or after a long day of use.
Charging the Battery
1.
Press the push lock buttons on the batteries to pull them
out of the equipment (Fig. 1).
2. Depending on your Snow Joe
®
+ Sun Joe
®
charger
model, how to recharge your lithium-ion battery will vary.
You may either insert your 24-volt battery into the
24VCHRG-QC Quick Charger (sold separately) or the
24VCHRG-DPC Dual Port Charger (sold separately)
(Figs. 2 – 3).
3.
The battery indicator LEDs will illuminate one by one
during the charging process. Unplug the charger
immediately when the 3 LEDs are all illuminated.
4.
The 24VCHRG-QC Quick Charger (sold separately) and
the 24VCHRG-DPC Dual Port Charger (sold separately)
are also equipped with additional charging indicating
lights which will indicate the charging status (Figs. 2 – 3).
m
CAUTION!
FIRE HAZARD. When
disconnecting the
charger from the battery, be sure to unplug the charger from
the outlet first, then disconnect the charger from the battery.
m
WARNING!
The chargers do not automatically turn
off when the battery is fully charged.
Please take care not
to leave the battery plugged into the charger. Switch off or
unplug the charger at the mains when charging is complete.
In order to operate this cordless blower vac you will
need two batteries and one charger from the iON+ 24V
System. See page 16 for battery and charger options and
specifications, or for more information visit sunjoe.com.
CORE TOOL
B CHARGER SOLD SEPARATELY
Fig. 1
Push lock
button
(on both
sides)
Fig. 2
Battery pack
24VCHRG-QC
quick charger
(Sold separately)
red
Charging
green
Fully
Charged
Fig. 3
Battery pack
24VCHRG-DPC
dual port charger
(Sold separately)
red
Charging
green
Fully
Charged