10
5. Timely recharging of the battery will help prolong the
battery's life. You must recharge the battery pack when
you notice a drop in the equipment's power.
IMPORTANT! Never allow the battery pack to become fully
discharged as this will cause irreversible damage to the
battery.
6. When charging is complete, remove the battery from the
charger by pulling the push lock button and sliding the
battery backward to unlock it from the charger.
Assembly
m
WARNING!
Do not insert the battery until assembly is
complete. Failure to comply could result in accidental starting
and serious personal injury.
m
WARNING!
To prevent serious personal injury,
make sure the battery is removed, and the blades have come
to a complete stop before inspecting, cleaning, or servicing the
unit.
m
WARNING!
The product must be fully assembled
before operation. Do not use a product that is only partially
assembled or assembled with damaged parts.
Follow the assembly instructions step-by-step and use the
pictures provided as a visual guide to easily assemble the
product.
Asse Fitting the Head
1. Remove the black cover on the cultivator head.
With the cultivator head lock unlocked, insert the
cultivator head into the end of the pole assembly
until it clicks in place (Fig. 4).
2. Flip up the cultivator head lock to lock the
cultivator head in place (Fig. 5).
m
WARNING!
Make sure nuts, screws and locks are
properly tightened before using the cordless cultivator.
3. To disassemble the cultivator head from the
pole assembly, unlock the cultivator head lock,
then press in the releasing tabs on each side, and at the
same time pull the cultivator head out from the
pole assembly (Fig. 6).
Operation
Intended Use
The 24V-TLR-CT cordless cultivator is designed for
small gardens and flower beds: this cordless cultivator
effectively loosens and turns over new soil. It may also be used
to mix coarse soil with fertilizer, peat, and compost.
This product may not be used to till extremely dry or wet soil.
The use of this product in rain or wet conditions is prohibited.
Fig. 4
Pole assembly
cultivator
head lock
cultivator
head
Fig. 5
Pole assembly
cultivator
head lock
cultivator
head
Fig. 6
Releasing tabs
cultivator
head lock
cultivator
head
PULL OUT
