background image

15

Storage

Follow the steps below to prepare the lawn mower for storage:

1.  Remove the safety key from the slot. 
2.  Clean the mower with a damp cloth or hand brush.
3.  Inspect the mower carefully for worn, loose or damaged 

parts. Check connections and screws and tighten if 

necessary. Pay special attention to the mower blade and 

replace/sharpen if it shows signs of wear. Refer to the 

Maintenance and Care section.

4.  Store the mower indoors in a dry, clean and cool area 

out of the reach of children. Do not store the unit next to 

corrosive materials, such as fertilizer and rock salt.

5.  Do not cover the lawn mower with a solid plastic sheet. 

Plastic coverings trap moisture around the mower, which 

can damage the unit.

6. 

The handle on your lawn mower can be folded for 

compact storage. Start by loosening the handle knobs on 

each side of the upper handle and fold down the upper 

handle (Fig. 17).

Disposal

Rec Disposal

The product comes in a package that protects it against 

damage during shipping. Keep the package until you are 

sure that all parts have been delivered and the product is 

functioning properly. Recycle the package afterwards or keep 

it for long-term storage.

WEEE symbol. Waste electrical products should not 

be disposed of with household waste. Please 

recycle where facilities exist. Check with your local 

authority or local store for recycling regulations.

Battery C Disposal

Always dispose of your battery pack according to federal, 

state, and local regulations. Contact a recycling agency in your 

area for recycling locations.

m

CAUTION!

 Even discharged battery packs contain 

some energy. Before disposing, use electrical tape to cover 

the terminals to prevent the battery pack from shorting, which 

could cause a fire or explosion.

m

WARNING! 

To reduce the risk of injury or explosion, 

never burn or incinerate a battery pack even if it is damaged, 

dead or completely discharged. When burned, toxic fumes 

and materials are emitted into the surrounding atmosphere.

1.  Batteries vary according to device. Consult your manual 

for specific information.

2.  Install only new batteries of the same type in your product 

(where applicable).

3.  Failure to insert batteries in the correct polarity, as 

indicated in the battery compartment or manual, may 

shorten the life of the batteries or cause batteries to leak.

4. 

Do not mix old and new batteries.

5. 

Do not mix Alkaline, Standard (Carbon-Zinc) or 

Rechargeable (Nickel Cadmium, Nickel Metal Hydride, or 

Lithium-Ion) batteries.

6. 

Do not dispose of batteries in fire.

7.  Batteries should be recycled or disposed of as per state 

and local guidelines.

S Support

If your Sun Joe

®

 24V-MJ14C-RM cordless lawn mower 

requires service or maintenance, please call 1-866-SNOWJOE 

 

(1-866-766-9563) for assistance.

Model + Serial Numbers 

When contacting the company or reordering parts, you will 

need to provide the model and serial numbers of your product. 

These are found on the decal affixed to the housing or handle 

of your mower. Copy these numbers into the space provided 

below.

Record the following numbers from the housing or handle of your  

new product:

Model #:

2    4   V    -   M   J   1   4    C   -    R  M

Serial #:

R

Fig. 17

Upper 

handle 

knob

Upper handle

Summary of Contents for Sunjoe 24V-MJ14C-RM





















Reviews: