SNOWJOE SUNJOE 24V-CRLM15-RM Operator'S Manual Download Page 15

15

•  For the best mulching performance, set the cutting height 

to remove approximately one third of the grass length, 

ideally no more than 1.5 in. at one time. If the grass is 

overgrown, it may be necessary to increase the cut height 

to make it easier to mow and to prevent overloading 

the motor. Slow your cutting pace in tall or thick grass 

conditions. For mulching extremely thick or tall grass, it is 

advisable to first cut at a high cut-height setting, and then 

re-cut to the final cut height. Otherwise, make narrower 

cuts and mow slowly. ALWAYS MAKE SURE THAT THE 

BLADE IS SHARP. 

Maintenance

m

WARNING!

 Before cleaning, repairing, or inspecting 

the reel mower, stop the machine, disconnect the safety key 

and the battery. Verify that all moving parts have come to a 

complete stop.

General

•  Always keep the reel mower clean and free of grass, dirt, 

or other debris.

•  Keep the handles dry, clean, and free of oil and grease. 
•  After each cutting session, remove accumulated grass 

clippings and debris using either a dry cloth or hand 

brush. You may also clean the equipment with a damp 

cloth. Do not use cleaning agents or harsh solvents as 

they may damage the equipment's plastic components. 

Make sure that no water penetrates the equipment's 

interior as intake of water can destroy the switch 

mechanism and the electric motor.

•  Do not clean the reel mower with running water, 

particularly with high-pressure water. 

•  Check all nuts, bolts, and screws for proper tightness 

before each use.

•  Frequently inspect the grass collection bag for signs of 

wear and replace immediately with a genuine Snow Joe

®

 

+ Sun Joe

®

 part if damage is found.

•  Replace excessively worn or damaged parts immediately.

Lubrication

All of the bearings in this product are lubricated with a 

sufficient amount of high grade lubricants for the life of the 

unit under normal operation conditions. Therefore, no further 

lubrication of the bearings is needed. 

Ensuring a clean cut

m

WARNING!

 

The steel blades are extremely sharp. 

To avoid injury, do not touch the blades while making 

adjustments. Misalignment of the blades can occur, which 

often results from blades that are either too loose or too tight. 

This can cause an uneven cut or difficulty pushing the mower.

1. 

Place the mower on a flat surface. Remove the handles 

and the grass collection bag. Turn the mower upside 

down to expose the blades and the cutting bar.

2.  

Insert a piece of paper between the steel blades and the 

cutting bar, then slowly turn the wheel by hand 

(Fig. 19).

3. 

All the blades should slice the paper evenly along the 

entire length of the cutting bar while the wheel is turned 

smoothly. Repeat this testing on the other side of the 

mower. 

4.

  If the mower cuts the paper intermittently, use the hex key 

wrench provided to tighten the adjustment bolt closest 

to where the intermittent cut was observed. Tighten the 

bolt on the appropriate end of the cutting bar by turning 

it clockwise approximately 1/8th of a turn until the 

steel 

blade contacts the cutting bar (Fig. 20).

5. 

If it becomes too difficult to move the wheel by hand while 

adjusting the reel blades, back off the adjustment bolt 

slightly by turning it counterclockwise. Test again with a 

new piece of paper to verify proper cutting action.

6. 

Make the same adjustment at the other end of the cutting 

bar.

m

WARNING!

 

Both adjustment bolts should have tension 

on final adjustment. Do not overtighten the adjustment bolts 

as this could damage the blades.

Fig. 19

Paper

Turn the 

wheel by 

hand

Cutting bar

Steel blade

Fig. 20

Adjusting 

bolts

Hex key

Summary of Contents for SUNJOE 24V-CRLM15-RM

























Reviews: