background image

10

Using the Adjustable Spray Wand

m

WARNING! 

High-pressure jets can be dangerous if 

subject to misuse. The jet must not be directed at persons, 

pets, live electrical equipment, or the appliance itself.

1.  The washer is equipped with an adjustable nozzle.
2.  The nozzle tip can be adjusted from pencil spray to fan 

spray by turning the nozzle tip adjustment knob (Fig. 12).

m

WARNING! 

Do not adjust the nozzle while the trigger 

is squeezed. Failure to do so could result in damage.

Recommended cleaning procedure

1.  For additional cleaning power, the unit comes equipped 

with a detergent spray bottle.

m

CAUTION! 

Only use detergents specifically 

recommended for use with pressure washers, such as Sun 

Joe

®

 HOUSE + DECK WASH (SPX-HDC1G), Sun Joe

®

 SNOW 

FOAM AUTO WASH (SPX-FCS1G), or Sun Joe

®

 HEAVY DUTY 

CLEANER (SPX-APC1G).

2.  Load the bottle with a suitable, non-corrosive detergent 

and attach it to the spray gun (Fig. 13).

  NOTE: The foam spray bottle is also featured with an 

adjustable nozzle and a foam-volume adjustable knob. 

Follow the instruction as shown to use the spray bottle  

(Figs. 14 – 15). 

3.  With the nozzle tip adjusted to a low-pressure fan spray, 

apply detergent from the bottom to the top of the dry 

surface to be cleaned. Applying detergent in this manner 

will dissolve dirt most effectively.

  NOTE: 

Wetting the surface first is not recommended as it 

dilutes the detergent and reduces its cleaning ability.

4.  Allow the detergent to remain on the surface for a short 

time before rinsing with the pressure washer. Do not allow 

the detergent to dry on the surface.

Shutting down

1.  Turn the switch to the OFF (0) position and unplug the 

power cord from the outlet.

2. 

Turn off the water source.

3.  Hold the trigger to release water pressure.
4.  Disconnect the garden hose from the water inlet on  

the unit.

5.  Disconnect the high-pressure hose connection on the 

trigger gun handle.

6.  Release the trigger and engage the gun safety lock.

Fig. 12

Fan spray

Pencil spray

Nozzle tip 

adjustment knob

Nozzle tip

Fig. 13

Detergent spray bottle

Fig. 14

Foam volume 

adjusting knob

Volume –

Fig. 15

Pencil spray

Fan spray

Summary of Contents for SPX202E

















Reviews: