SNOWJOE SJ624E-ES-RM, Operator'S Manual

Page: 7 / 20

6
Unpacking
Carton Contents:
• Electric snow blower
• Lower handle frame
• Upper handle frame
• Chute deflector
• Handle knobs/deflector knobs (6)
• Square J-bolts (2)
• Carriage bolts (4)
• Rubber washers (2)
• Manuals with registration card
1. Carefully remove the electric snow thrower and check to
see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new electric snow
thrower. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils
or small parts. These items can be swallowed and pose a
suffocation risk!
Assembly
Handle Frame Assembly
1. Align the holes in the end of the lower handle frame with
those in the handle brackets (Fig. 1).
2. Secure the lower handle frame to the handle brackets with
the 2 sets of knob and J-bolt, like shown (Fig. 2). Make
sure the knobs are tightened.
3. Align the holes in the end of the upper handle frame with
those in the top of the lower handle frame (Fig. 3).
m
CAUTION
m
Inspect wiring, which, if damaged during shipping,
may cause serious bodily injury during equipment use.
If any damage is seen or suspected, do not assemble.
Instead, contact the Snow Joe
®
+ Sun Joe
®
customer
service center at 1-866-SNOWJOE (1-866-766-9563)
for assistance.
Handle with care during assembly so that electrical
wiring does not become damaged.
Fig. 1
Lower
handle frame
Handle
bracket
Align the holes
Fig. 2
J-bolt
Lower
handle
knob
Fig. 3
Align the holes
Lower handle
frame
Upper handle
frame